SmartMat 100w/m2 20.0m2 2000w Underfloor Heating Kit + Danfoss ECtemp Thermostat
SmartMat Underfloor Heating Kit
The SmartMat underfloor kit includes the finest of products. Built up with 2 x SmartMat 100w/m2 10.0m2 mats, a Danfoss ECtemp programmable thermostat, Superspray adhesive for matting (500ml), a Sensor tube, Installation instruction and SmartMat warranty.
SmartMat Underfloor Heating Mat
The SmartMat underfloor heating mat has a self adhesive fibre glass backing mesh with an ultra-thin twin conductor 3mm heating cable pre attached, ensuring minimal increase to the existing floor height. The function of the matting system is to provide a warm floor. Superior product design ensures a speedy installation with an even heat across the complete floor surface, whilst allowing unlimited adjustment of the heating element to suit irregular formats.
Contents of SmartMat 100w/m2 20.0m2 Underfloor Kit
- 2 x SmartMat 100w/m2 10.0m2 mats
- Danfoss ECtemp underfloor heating thermostat
- Thermostat conduit sensor tube
- Installation instructions
- Warranty commissioning record
Tools needed for Installation
You will require the following items to install and test the floor warming systems.
- Tape measure
- Drawing pad and pencil
- Utility knife
- Cable strippers
- Screw driver
- Resistance tester (multimeter), insulation resistance tester
You will also need the appropriate tools and materials to install your finished floor surface; these will probably include products like self-levelling compound, insulated backer board, notched tile trowel and various other tools and materials for your specific project.
|Mat Length||40 m|
|Mat or Kit||Kit|
|Mat Type||Timber Base|
|Mat Width||0.5 m|
|No. of Mats||2|
|Product Type||Mat Kit|
|Thermostat Choice||Danfoss ECtemp|