Electric Underfloor Heating - Underfloor Heating

» Home / Products / Insulation

ePanel

ePanel is a Lightweight insulated tile backing board (600mm x 1200mm x 10mm or 600mm x 1200mm x 6mm) developed specifically for use with tiles floors. It consists of a Polyfoam core with glass fibre reinforced polymer-modified cement faces.

ePanel is dimensionally stable, doesn't rot or warp and provides excellent resistance to moisture. It also offers the additional benefit of a high level of thermal insulation, making it the ideal substrate for floor tiling over eMat heating systems.

ePanel is extremely light (2.6kg/m²). It's easy to cut (using fine tooth saw, jigsaw or Stanley knife, for example) and to work with.

ePanel 10mm (1200mm x 600mm)

£12.75 + VAT

ePanel 6mm (1200mm x 600mm)

£12.75 + VAT

ePanel Fixings (50 per bag)

£9.61 + VAT

For use with ePanel Board. Comes in a pack of 50 fixings.

eMesh (46m)

£13.90 + VAT

eMesh for use with ePanel Board. Provides a tight, long lasting seal preventing moisture damage to the floor beneath.

Example	Instruction
	Step 1 Lay each board on to a bed of flexible cement based tile adhesive applied with a notched spreader to form a level base. (Follow manufacturers instructions.)
	Step 2 Lay the panels into the adhesive with staggered joints, brickwork style. Use a straight edge and spirit level to ensure good alignment. Lightly butt the boards together, leaving 3mm gap around the outer perimeter of the room.
	Step 3 (For Suspended Timber Floor Only). Secure with ePanel fixings at a rate of five per m. Make sure fixings are a minimum of 30mm from the edge of the board. Tighten ePanel fixing to the board's surface then drive the washer flush to the surface using a rubber mallet. Re-tighten the screw. Make sure that the floor is level then leave for the adhesive to dry out.
	Step 4 Fill the gaps between ePanel boards with the adhesive. Strengthen the joints with ePanel Mesh bedded into the wet adhesive.
	Step 5 Now lay the eMat heating system according to the instructions.
	Step 6 Lay tiles using the correct adhesive for the tiles selected (check with the tile supplier), then grout.

Unable to find what you are looking for? Or, just want to understand our products more? Perhaps these resources will help you. If not, please don't hesitate to Contact Us.

Subtotal	£0.00
Shipping	£0.00
VAT	£0.00
Total	£0.00