Electric Underfloor Heating - Underfloor Heating

The eMat Pro 100 Range
Each model in the eMat Pro 100 range consists of a thin self-adhesive mat with a 3mm diameter wire. The eMat Pro wire is a twin conductor, which means you don't need to worry about a return wire to your controller.

The eMat Pro 100 & eStat Kits
Each eMat Pro 100 and eStat Kit consists of a thin self-adhesive mat with a 3mm diameter wire and a eStat 762 thermostat. The eMat Pro wire is a twin conductor, which means you don't need to worry about a return wire to your controller.

Specification	Value
Approval	CE Approval
Width	0.5m
Self-adhesive	Yes
Conductor	Twin
Voltage	230V
Nomimal Power	90W/m²
Max. Exposure Temperature	120°C
Min. Installation Temperature	+5°C
Heating Cable	Ca. 3mm, Teflon insulation
Cold Lead	1 x 4 cold lead, cross section 2 x 0.5mm², 1 x 1.5mm² earth braid
Mat	Seld adhering fibre glass mat
Wet Room	Approved, RCD required

For further information please consult the following pages.

The downloads below are offered as PDF documents unless stated otherwise.

Unable to find what you are looking for? Or, just want to understand our products more? Perhaps these resources will help you. If not, please don't hesitate to Contact Us.

Subtotal	£0.00
Shipping	£0.00
VAT	£0.00
Total	£0.00

eMat Pro 100

eMat Pro 150