Electric Underfloor Heating - Underfloor Heating

» Home / Products / eMat

eMat Pro 100

Ideally suited for installation on a timber based floor.

» Easy to install
» Self-adhesive
» 3mm thin cable
» Twin conductor
» Single connection

From:
Loading + VAT

eMats
eMat & eStat Kits
Specifications
Installation
Help

The eMat Pro 100 Range
Each model in the eMat Pro 100 range consists of a thin self-adhesive mat with a 3mm diameter wire. The eMat Pro wire is a twin conductor, which means you don't need to worry about a return wire to your controller.

Area	Load	Dimensions	Price

The eMat Pro 100 & eStat Kits
Each eMat Pro 100 and eStat Kit consists of a thin self-adhesive mat with a 3mm diameter wire and a eStat 762 thermostat. The eMat Pro wire is a twin conductor, which means you don't need to worry about a return wire to your controller.

Area	Load	Dimensions	Price

Specification	Value
Approval	CE Approval
Width	0.5m
Self-adhesive	Yes
Conductor	Twin
Voltage	230V
Nomimal Power	90W/m²
Max. Exposure Temperature	120°C
Min. Installation Temperature	+5°C
Heating Cable	Ca. 3mm, Teflon insulation
Cold Lead	1 x 4 cold lead, cross section 2 x 0.5mm², 1 x 1.5mm² earth braid
Mat	Seld adhering fibre glass mat
Wet Room	Approved, RCD required

For further information please consult the following pages.

What Is eMat?
How To Choose eMat
How To Install eMat
Resistances
Manufacturer Adhesive Guidelines
Floor Constructions
Electrical Connections
ePanel Insulation
Information

The downloads below are offered as PDF documents unless stated otherwise.

Manual and Installation guide
Promotional Brochure

Unable to find what you are looking for? Or, just want to understand our products more? Perhaps these resources will help you. If not, please don't hesitate to Contact Us.

Frequent Asked Questions
Contact Us
Design It For Me
Terms & Conditions
Privacy Policy
Delviery Information
Online Warranty

eMat Pro 150

Ideally suited for installation on a concrete base, tile-backer boards and existing tiled floors.

» Easy to install
» Self-adhesive
» 3mm thin cable
» Twin conductor
» Single connection

From:
Loading + VAT

eMats
eMat & eStat Kits
Specifications
Installation
Help

The eMat Pro 150 Range
Each model in the eMat Pro 150 range consists of a thin self-adhesive mat with a 3mm diameter wire. The eMat Pro wire is a twin conductor, which means you don't need to worry about a return wire to your controller.

Area	Load	Dimensions	Price

The eMat 150 & eStat Kits
Each eMat Pro 150 and eStat Kit consists of a thin self-adhesive mat with a 3mm diameter wire and a eStat 762 thermostat. The eMat Pro wire is a twin conductor, which means you don't need to worry about a return wire to your controller

Area	Load	Dimensions	Price

Specification	Value
Approval	CE Approval
Width	0.5m
Self-adhesive	Yes
Conductor	Twin
Voltage	230V
Nomimal Power	160W/m²
Max. Exposure Temperature	120°C
Min. Installation Temperature	+5°C
Heating Cable	Ca. 3mm, Teflon insulation
Cold Lead	1 x 4 cold lead, cross section 2 x 0.5mm², 1 x 1.5mm² earth braid
Mat	Seld adhering fibre glass mat
Wet Room	Approved, RCD required

For further information please consult the following pages.

What Is eMat?
How To Choose eMat
How To Install eMat
Resistances
Manufacturer Adhesive Guidelines
Floor Constructions
Electrical Connections
ePanel Insulation
Information

The downloads below are offered as PDF documents unless stated otherwise.

Manual and Installation guide
Promotional Brochure

Unable to find what you are looking for? Or, just want to understand our products more? Perhaps these resources will help you. If not, please don't hesitate to Contact Us.

Frequent Asked Questions
Contact Us
Design It For Me
Terms & Conditions
Privacy Policy
Delviery Information
Online Warranty

Subtotal	£0.00
Shipping	£0.00
VAT	£0.00
Total	£0.00